Product Details:
Production Capacity | 30 Kg |
Material | Cast Iron |
Model Name/Number | THE URH SERIES (MUTLISPLINDLE) |
Sizes | Dia. 125 |
Height Mm | 110 |
Clamping Torque (N-m) | 150 - 30 Bar @ Hydralauic |
Table Diameter (mm) | 125 -2S |
T-Slot Width (mm) | 10 x 2 nos |
Weight | 75 Kg |
Country of Origin | Made in India |
THE URH SERIES (MUTLISPLINDLE)
PRODUCT FEATURES:
Diameter:125 -2Smm, 125-3Smm, 170-2Smm, 170-3Smm, 170-4Smm
Pneumatic/Hydraulic Clamping.
Gear Mechanism - Motor to Worm Shaft.
Rotary Spindles at close center distances.
Compact Drive through AC Servo Motor.
Common worm shaft, yet independent backlash adjustment.
—----------------------------------------------------------
Multi-spindle options of 2, 3 and 4 spindles.
Modular structure and compact design.
East maintenance adjustments.
Tact time reduced.
Ideal for tapping machines with high speed rotation.
Product Details:
Material | Iron |
Size | 3000x2500 mm |
Max. Speed | 2000 RPM |
Height Mm | 1480 |
Clamping Torque (N-m) | 70000 |
Table Diameter (mm) | 4000 |
T-Slot Width (mm) | 28 x 2 nos |
Weight | 36000 Kg |
A rotary table is the revolving plate on the rig's drill floor that turns the drill string in a clockwise path. The rotary desk surrounds the 4 or six-sided kelly bushing and kelly drive to which the drill string is attached, transferring the power from the rig's drive machine to the drill string and bit.
The rotary table hyperlinks the rig's electricity supply to the drill string, it may be defined as a seize. maximum rigs have a rotary table because the top mover for the drill string, however, pinnacle power systems that permit continuous rotation of the drill string have changed the rotary table, the kelly bushing and the kelly pressure in some rigs, because of adjustments in trenchless construction requirements.
The rotary drive desk is prevalent in pinnacle-force rigs, that is, those that have their drive motor on the pinnacle of the rig. Drill string sections are first connected to the lowest hollow assembly. As drill string sections pass into the bore, extra sections of drill string are attached to the top pressure motor and to sections inside the bore, building the drill string from the pinnacle. those sections of drill string screw together using a clockwise movement. The rotary table -- which turns clockwise -- is used to tighten the segments of the drill string.
Large Size Rotary Tables
Features
Product Details:
Brand | UCAM Pvt Ltd |
Large Size Rotary Table
Features:
Product Details:
Brand | UCAM Pvt.Ltd. |
Features:
Product Details:
Max. Speed | 300 rpm |
Height Mm | 150 mm |
Clamping Torque (N-m) | 700 |
Table Diameter (mm) | 250 |
T-Slot Width (mm) | 12*2 nos |
Weight | 75 kg |
Country of Origin | Made in India |
Rotary tables are used for precision metal work. They are usually made of a solid base that can be attached to another bracket. The table is a disk that rotates freely or with the help of a spiral (hand crank).
The rotary table is a disk-shaped metalworking device that enables precise positioning of the workpiece. It allows the metalworker to cut or drill the workpiece at precise intervals vertically or horizontally around a fixed axis. The turntable can be controlled both manually and digitally by computer. Some types of rotary tables are designed to be used with indexers or separators for special operations. A rotary table used with one of these positioning plates is often called a dividing or indexing head.
The Rotary tables is usually a sturdy base that can be attached to a separate stand or table. This device is basically a rotating disc that holds the workpiece in place while cutting or drilling. The disk portion of the rotary table can be freely rotated or rotated for indexing operations by means of an attached control lever known as a worm wheel. Tables used in precision operations are usually turned with a duplex type helical wheel to compensate for clearance. Rotary tables used in automated metalworking processes are connected to a digitally controlled computer.
Rotary tables are mostly used in a flat position with the table axis vertical. Sometimes they are installed with the shaft pointing horizontally so that the suppository can be used to support the free end of the workpiece. When this device is attached to the secondary table, the workpiece can be centered on the axis of the rotary table, which is then centered on the axis of the cutter. In this configuration, the axes of the rotary table, secondary table and cutter are coaxial to facilitate concentric cutting operations. This configuration also allows the secondary table to be moved to drill evenly spaced holes in the workpiece.
Direct Drive Rotary Table
Features:
Product Details:
Brand | UCAM Pvt Ltd |
Vertical Mounting Rotary Table
Features:
Product Details:
Model Name/Number | URQ SERIES |
Brand/Make | UCAM-India |
Brand | UCAM PVT. LTD. |
Model/Type | URQ-180 ,URQ-200, URQ-250, URX-320 |
CNC ROTARY TABLE: URQ SERIES
PRODUCT FEATURES:
Diameter: 180mm
Pneumatic/Hydraulic Clamping.
Gear Mechanism - Motor to Worm Shaft.
-----------------------------------------
Precision Machining result due to high positioning accuracy.
Maintenance friendly and easy adjustment.
Quick Acceleration.
Less Friction.
Extremely robust design with high rigidity.
Compact & Less Weight.
Modular Connector for easy cable management
High reliability.
Product Details:
Brand/Make | UCAM Pvt. Ltd. |
Model/Type | URH-401, URH-500, URH-631 |
Product Details:
Table Diameter | 250 |
Table Weight | 88kg |
Center Height | 160mm |
CNC ROTARY TABLE: URQ SERIES
FEATURES:
Diameter: 250mm
Pneumatic/Hydraulic Clamping.
Gear Mechanism - Motor to Worm Shaft.
-----------------------------------------
Precision Machining result due to high positioning accuracy.
Maintenance friendly and easy adjustment.
Quick acceleration.
Less friction.
Extremely robust design with high rigidity.
Compact & less weight.
Modular Connector for easy cable management.
High reliability.
URPX SERIES
PRODUCT FEATURES:
Diameter: 200mm
Pneumatic/Hydraulic Clamping.
Gear Mechanism - Motor to Worm Shaft.
High repeatability (<5”)
Optional thru-hole capability for automation
High rigidity in the support end with modular fixture plate
Drop-in rotary union for power clamp (optional)
Extremely rigid base plate which keeps the entire system aligned